Canon imagePROGRAF iPF510 - Manual (Page 27)

Printer parts
Printer Parts
Printer parts
Front
Front of the printer with the standard Paper
Tray Unit installed (*1)
Front of the printer with the optional Roll
Feed Unit installed
*1: When the Cassette and Output Tray are removed
a. Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as
needed. (→P.16)
b. Paper Tray Unit (Standard)
A standard unit used when loading sheets manually. To print on rolls, replace this unit with the optional
Roll Feed Unit.
c. Paper Tray Cover
Open this cover to load paper in the Tray. (→P.17)
d. Roll Feed Unit (Optional)
To print on rolls, replace the Paper Tray Unit with this unit. You can also load sheets in this unit manually.
e. Roll Feed Unit Cover
Open this cover to load rolls. (→P.18)
f. Control Panel
Use this panel to operate the printer and check the printer status. (→P.21)
g. Output Tray
Printed documents are ejected into the output tray.
h. Output Tray ( Front Paper Feed Slot )
All printed documents are ejected from this slot. When loading heavyweight paper, insert it here. (→P.17)
Printer Parts 13