Canon imagePROGRAF iPF510 - Manual (Page 331)

Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width (Mac OS 9)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.139)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Heavyweight Coated Paper
• Roll width: 10 inches (254.0 mm)
1. Select the printer in Chooser.
2.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
3. In A Page Size, click the size of the original. In this case, click ISO A4.
Note
• All sizes are available in borderless printing if you resize originals to t the roll width.
4.
Click I OK to close the dialog box.
5. In the application, create an original that takes up the entire space of the paper size.
6.
Choose Print in the application menu.
Enhanced Printing Options 317