Canon imagePROGRAF iPF510 - Manual (Page 502)

Device Setup Utility
Conguring the IP Address Using imagePROGRAF
Device Setup Utility
From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the
printer to congure the printer’s IP address. This topic describes how to congure the IP address using
imagePROGRAF Device Setup Utility.
Important
• To congure network settings, you must be logged in with administrative rights such as “Administrator”
account. We recommend that your network administrator congure the network settings.
• For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAF
Device Setup Utility”. (→P.487)
1.
Start imagePROGRAF Device Setup Utility from the start menu.
2. In the Product Name list displayed, select the printer to congure.
3.
Choose Protocol Settings from the Printer menu.
4.
In the Setting IP Address list, choose Manual.
5. Enter the IP address assigned to the printer and click the Set button.
6.
Click OK after the Conrmation message dialog box is displayed.
7. Exit imagePROGRAF Device Setup Utility.
Note
• To congure the IP address automatically, choose Auto in the Setting IP Address list and select
DHCP, BOOTP, or RARP.
• You can also specify the subnet mask and default gateway.
488 Windows Software