Canon imagePROGRAF iPF510 - Manual (Page 565)

Network Setting
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
3. Press ◄ or ► to select Ethernet Driver, and then press ▼.
Interface Setup
Ethernet Driver ↓
4.
Press ◄ or ► to select Auto Detect, and then press ▼.
Ethernet Driver
Auto Detect ↓
5. Press ◄ or ► to select Off, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Auto Detect
= Off
Return to the Ethernet Driver menu.
6.
Press ◄ or ► to select Comm.Mode, and then press ▼.
Ethernet Driver
Comm.Mode ↓
7. Press ◄ or ► to select the communication mode, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Comm.Mode
= Half Duplex
Return to the Ethernet Driver menu.
8.
Press ◄ or ► to select Ethernet Type, and then press ▼.
Ethernet Driver
Ethernet Type ↓
9. Press ◄ or ► to select the Ethernet type, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Ethernet Type
= 10 Base-T
Return to the Ethernet Driver menu.
Network Setting 551