Canon imagePROGRAF iPF510 - Manual (Page 572)

Network Setting (Windows)
Conguring the Printer’s NetWare Network Settings
Follow the steps below to congure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4. Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol
Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item Details Default Setting
Frame Type Specify the type of frame to
use in NetWare. Disabled
NCP Burst Mode Activate this setting to use
NCP Burst Mode.
This mode supports fast data
transfer when printing in queue
server mode. Normally, leave
the setting On. On
Print Application Choose the print service.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
NDS PServer
Packet Signature Select If Requested by Server
to use packet signature. If Requested by Server
Bindery
PServer File Server Name Specify the name of a le
server that has a NetWare print
server.
(0-47 characters) -
Print Server Name Specify the name of a NetWare
print server.
(0-47 characters) -
Print Server Password Set a password for the print
server.
(0-20 characters) -
Polling Interval Specify the interval to conrm
jobs.
(1-15 seconds) 5
RPrinter Print Server Name Specify the name of a NetWare
print server.
(0-47 characters) -
558 Network Setting