Canon imagePROGRAF iPF510 - Manual (Page 612)

Adjusting the feed amount
Adjusting the Vacuum Strength
When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or
the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve
results.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Med.Detail Set., and then press ▼.
MAIN MENU
Med.Detail Set. ↓
3. Press ◄ or ► to select the type of paper, and then press ▼.
Med.Detail Set.
Plain Paper ↓
4. Press ◄ or ► to select VacuumStrngth, and then press ▼.
Plain Paper
VacuumStrngth
5. Press ◄ or ► to select the level of suction against paper on the Platen, and then press the
OK button.
The setting is updated, and an equals sign “=” is displayed at left.
VacuumStrngth
= Automatic
598 Adjustments for Better Print Quality