Canon imagePROGRAF iPF510 - Manual (Page 668)

Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the
Power button to turn the printer on.
In Windows, select the printer by clicking Select Printer or Printer in
the printing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or
Print Center ) and try printing again.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
In Mac OS 9, select the printer in Chooser and try printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers )
window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Open the Printer Setup Utility (or the Print Center ).
2. Select the printer, and then Start Jobs in the Printers menu to
restart the print job.
The print job is paused. (The
printer is in Sleep mode.)
In Mac OS 9, restart the print job as follows.
1. Open imagePROGRAF Printmonitor.
2. Choose Resume Printing in the File menu to restart the print job.
The Printer Does Not Respond Even if Print Jobs are Sent
Cause Corrective Action
The printer is ofine. Press the Online button on the Control Panel to bring the printer online.
The Display Screen indicates the system is lling with ink
Cause Corrective Action
When the printer was turned off previously, some
cleaning operation was terminated. Wait until the system has been lled with ink. This
process may take about ten minutes.
654 Troubleshooting