Canon imagePROGRAF iPF510 - Manual (Page 677)

Problems with the printing quality
Image Edges are Blurred or White Banding Occurs
Cause Corrective Action
The Platen suction is too strong. Set VacuumStrngth to Weakest.
(→P.598)
The Printhead is set too high. Lower the Printhead.
(→P.586)
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjustment. Execute Adjust Band during printing.
(→P.587)
The length of printed images is inaccurate
Cause Corrective Action
In the printer menu, Band Joint is specied in Feed
Priority. To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length. You can adjust the feed amount in 0.02
0ncrements.
(→P.51)
Documents are printed crooked
Cause Corrective Action
Skew Skew Check Lv. has been set to Loose or Off. Choose Standard in Skew Check Lv.. If strict skew
detection is required, choose High Accuracy in
Skew Check Lv..
Documents are printed in monochrome
Cause Corrective Action
In the Advanced Settings of the printer driver,
Monochrome, Monochrome (BK ink), or
Monochrome Bitmap is specied in Color Mode. In the Advanced Settings of the printer driver,
specify Color in Color Mode and try printing again.
The Printhead nozzles are clogged. Print a test pattern to check the color ink nozzles and
see if they are clogged.
(→P.608)
Troubleshooting 663