Canon imagePROGRAF iPF510 - Manual (Page 707)

Messages regarding printing or adjusment
Messages regarding printing or adjusment
Paper Type / Please Change
Cause Corrective Action
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.581) The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Adjust the feed amount manually.
(→P.590)
Online Key / and recalibrate
Band Adj Error / Please Readjust
Cause Corrective Action
The feed amount cannot be adjusted; highly
transparent lm is loaded. Adjust the feed amount manually.
(→P.590)
Printhd Adj Err / Please Readjust
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.608)
2. Clean the Printhead if the nozzles are clogged.
(→P.610)
The Printhead cannot be aligned; highly transparent
lm is loaded. We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.581)
Error Message 693