Canon imagePROGRAF iPF510 - Manual (Page 87)

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V: 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(11 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Off 1 W max. (*1)
Operating noise Approx. 52 dB (A) max.
Temperature 15-30°C (59-86°F) Operating
environment
Humidity 10-80%, non-condensing
Printer only 819Ч733Ч317 mm (32.2Ч28.9Ч12.5 in) Dimensions (W × D
× H)
Printer and Roll
Feed Unit 819Ч810Ч344 mm (32.2Ч31.9Ч13.5 in)
Printer only 39 kg (86 lb) Weight
(not including the
Printhead and Ink
Tank )
Printer and Roll
Feed Unit
(not including rolls) 43 kg (94.8 lb)
Printer only 1,119Ч1,833Ч617 mm (44.1Ч72.2Ч24.3 in) Space required for
installation (*2)
Printer and Roll
Feed Unit (not
including rolls) 1,119Ч1,910Ч644 mm (44.1Ч75.2Ч25.4 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, IT Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,
turn off the printer and unplug the power cord.
*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300
mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only
when printing from the Front Paper Feed Slot, leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
Printer Parts 73