Loading and printing on rolls – Canon imagePROGRAF iPF510 User Manual
Page 96
Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
An optional Roll Feed Unit is required.
(→P.70)
(→P.143)
•
If you have installed an optional Roll Feed Unit, select Roll Feed Unit on the Device Settings sheet of
the printer properties, and then click Acquire Status. This will enable roll printing.
(→P.480)
•
If a sheet is loaded in the Tray, remove it before this procedure. (→P.141)
•
Before printing banners or other large-format documents, spread a clean cloth or paper over the oor.
Long sheets that touch the oor after printing may become dirty.
•
If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.131)
1.
Turn the printer on. (→P.25)
2.
Select roll paper as the paper source. (→P.111)
82 Basic Printing Workow