When mounting the camera at upright position, Mounting the camera at a flat location, Using a tripod – Canon VB-C300 User Manual
Page 42
2-18
Mounting the Camera at a Flat Location
When Mounting the Camera at Upright Position
Note
● Observe the precautions in “Before Setting Up the Camera” (→ P.2-14) and follow
them before mounting the camera.
● The shooting position of the VB-C300 is set on the assumption that the camera is
mounted at the inverted position. To reverse the camera video image upside down,
see “Setting Image Size, Quality and Camera Control (Video and Camera)” in the
Operation Guide (
→ dOperation Guide P.1-8).
Attach the Rubber Feet to the camera.
Place the VB-C300 at a flat and stable location.
VID
EO
OU
T
LIN
E
IN
LIN
E
OU
T
DC
IN
12
-1
3V
AC
IN
24
V
10
0/
10
BT
BA
OUT
IN
-2
IN
-1
Using a Tripod
The screw hole for mounting a tripod is on the bottom of the VB-C300 toward the center.
Note
● Do not overtighten the mounting screw.
If excessive force is used to tighten the mounting
screw, camera head movement may be impeded,
or other malfunctions may result.
● Always use a tripod mounting screw that is less
than 5.5 mm (0.22 in.) in length. The use of screws
5.5 mm (0.22 in.) long or longer could damage the
camera. Also, the tripod seat used should be at
least 30 mm (1.18 in.) in diameter.
30mm
(1.18inch)
or wider
5.5mm
(0.22inch)
or shorter
Tripod
mounting
screw
Setting Up the Camera