5 types of measurements, Measurement screen, Changing the alignment mode – Canon TX-20 Full Auto Tonometer User Manual

Page 49: Types of measurements

Advertising
background image

49

This chapter explains how to perform the settings on the Measurement screen, PATIENTID screen,
and MENU screen.

Measurement Screen

You can set the alignment mode, number of measurements, and the eye fixation lamp in the
measurement mode.

Alignment mode

Measurement count

Eye fixation lamp

Measurement Screen

Changing the Alignment Mode

The TX-20 lets you choose between the full auto, auto, and manual alignment modes.

Fullauto-alignmentmode(

)

Press the measurement button to do alignment, measurement (1 to 3 times), switching eyes,
alignment, measurement (1 to 3 times), and output of measurement results automatically.
In the MENU screen you can set whether or not to automatically output the measurement results.

Auto-alignmentmode(

)

Press the measurement button to do alignment and one measurement automatically.

Manual-alignmentmode(

)

All operations are done manually.

1

Press the alignment mode key.

Every time the key is pressed, the alignment mode changes.

Alignment

mode key

Alignment

mode

Measurement Screen

5

Types of Measurements

L-IE-5191C_TX-20.indb 49

2013/07/18 13:10:30

Advertising