Canon TX-20 Full Auto Tonometer User Manual

Page 54

Advertising
background image

54

5TypesofMeasurements

3

Select a character to input.

Use the CHIN REST button and the measurement unit vertical movement ring to move the selection
cursor to the position of the [C] in the character list.

Select [C].

4

Input the selected character.

While [C] is selected with the selection cursor, press the measurement button one time.
The “C” appears to the right of the “2”.

The “C”

appears.

5

Select the place to the right of the character to delete.

Move the ID cursor to the right of the character to delete.

Use the CHIN REST button and the measurement unit vertical movement ring to move the selection
cursor to the position of

(ID cursor movement command). Press the measurement button one

time to move the cursor one space to the left.

The procedure in steps 5 to 6 is explained using an example of deleting a “2” from the patient ID “12C”.
In this example, the cursor moves to the “C” to the right of the “2”.

Select the “C”

to the right of

the “2”.

Select .

L-IE-5191C_TX-20.indb 54

2013/07/18 13:10:33

Advertising