Canon TX-20 Full Auto Tonometer - Manual (Page 69)

5TypesofMeasurements
69
Setting the Time, Date, and Power Saving Mode
You can set the date, time, and power saving mode, in the Other Menu.
On the TX-20, you can set the data and time so that the dates of measurements are output as data.
Also, you can set the monitor to turn off and enter power saving mode if no operations are done for a
set period.
Press a button on the operation panel or a soft key to recover from the power saving mode.
How to Enter the Other Menu
MENU screen > Other tab > [Date & Time]
Setting items Description
Factory
settings
Date Set the date.
[2010 to 2099]: Year
[1 to 12] or [JAN to DEC]: Month. The [Format] setting is [MDY]; if [DMY]
is selected, then [JAN to DEC].
[1 to 31]: Date
Time Set the time.
[00 to 23]: Hour
[00 to 59]: Minute
Format Select the format to display the date.
[YMD]: Year, month, date
[MDY]: Month, date, year
[DMY]: Date, month, year
MDY
Sleep Time Set the time before entering power saving mode.
[OFF]: Does not enter power saving mode.
[5min]: Five minutes
[10min]: Ten minutes
[15min]: Fifteen minutes
5min
Settings for the LCD
You can set the brightness of the LCD screen in the LCD menu.
How to Enter the LCD Menu
MENU screen > Other tab > [LCD]
Setting items Description
Factory
settings
Adjust
Brightness Adjusts the brightness of the LCD.
For this setting, press the measurement button to go to the LCD
brightness adjustment screen.
[1 to 100]: LCD brightness
50
L-IE-5191C_TX-20.indb 69 2013/07/18 13:10:38