Canon TX-20 Full Auto Tonometer - Manual (Page 80)

80
7Troubleshooting
Error
Code Cause Remedy
100
Found abnormality in setting during initialization operation
when power was turned on. Return to factory settings.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Turn the power off and then on again.
101 Abnormality occurred while checking clock.
102 Failed to read time.
103 Failed to set time.
104 Abnormality occurred during printer cutter operation.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Open and close the paper cover and check if the error
recurs.
3) If the error occurs again, turn the power off and then on.
105 The voltage being supplied to the printer is low.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Turn the power off and then on again.
106 Abnormality occurred at printer cutter position.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Open and close the paper cover and check if the error
recurs.
3) If the error occurs again, turn the power off and then on.
107 Printer operation was not done normally. 1) Record the message code, contents (including error
codes) and then execute [OK].
2) Turn the power off and then on again.
108 Printer power was not turned on or off normally.
119
Abnormality occurred while charging driver for air blower
when CHECK button was pressed.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Press the CHECK button again and check if the error
recurs.
120
Abnormality occurred while measurement unit was
detecting position during move to initial position.
1) Record the message code, contents (including error
codes) and then execute [OK].
2) Turn the power off and then on again.
123
Abnormality occurred in USB transmission.
124
125
Abnormality occurred in LAN transmission.
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
L-IE-5191C_TX-20.indb 80 2013/07/18 13:10:40