Canon CF-1 - Manual (Page 40)

6. Photography auxiliary functions
-40-
6.5 Panning function and tilting function
6.5.1 Panning function
This function is used to take photographs of edges in the side-
to-side direction.
First, turn the panning lock knob to the
position, and
then adjust the angle of the digital retinal camera main unit in
the side-to-side right direction.
Before carrying the camera around, turn the panning lock
knob to the
position.
6.5.2 Tilting function
This function is used to take photographs of edges in the up/
down direction.
First turn the tilting lock lever to the
position, and then
adjust the angle of the digital retinal camera main unit in the
vertical direction.
The lever clicks into position when it is at the horizontal
setting so it is easy to check the horizontal position.
Before carrying the camera around, turn the tilting lock lever
to the
position.
Note: Hold the pan-tilt grip when adjusting the camera angle by panning or tilting.
Note: To lock the camera at the tilt angle, turn the tilting lock lever precisely to the position,
and check that the camera is completely locked.
If it is not completely locked, perform these steps again.
LOCK
position
UNLOCK position
LOCK
position
UNLOCK position
Pan-tilt grip
000_L-IE-5152E_CF-1.book Page 40 Monday, July 29, 2013 10:30 AM