2 turning on the power, 1 check items on the behaviors of the equipment – Canon CF-1 User Manual
Page 43
Continued on the following page >>
7. Daily Inspection and Maintenance
-43-
7.1.2 Turning ON the Power
Always perform the inspections shown in the following sections to ensure proper function before use.
7.1.2.1 Check Items on the Behaviors of the Equipment
Turn on the power of all the equipment that has been connected as a system and check the following items.
EOS D
igit
a
l camera
Check that the EOS digital
camera is firmly attached and
the cables are connected
correctly.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there is a
problem.
Lo
cation
Inspection
Result
Remedy
Month
Day
Month
Day
Month
Day
CAUTION
For safety reasons, be sure to inspect the instrument before using it.
!
Lo
ca
tio
n
Inspection
Result
Remedy
Month
Day
Month
Day
Month
Day
Main unit
Check whether the POWER
lamp lights.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if the
POWER lamp fails to light even
though the power cable is
connected properly.
Check that there is no dirt or
scratches on the objective
lens.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Clean the lens if it is dirty (see
page 48).
Contact your sales representative
or local Canon dealer if it is
scratched.
Place a sheet of paper in front
of the objective lens, turn the
brightness adjuster, and check
that the brightness for
observation changes.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there are
no changes.
Place a sheet of paper in front
of the objective lens and press
the shutter release button to
check that the flash is emitted.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if no flash is
emitted.
Set to fluorescein
angiography mode and press
the TIMER/C switch to check
that the timer starts and stops
properly.
Pass/
Fail
Pass/
Fail
Pass/
Fail
Contact your sales representative
or local Canon dealer if there is a
problem.
000_L-IE-5152E_CF-1.book Page 43 Monday, July 29, 2013 10:30 AM