Canon CF-1 - Manual (Page 56)

7. Daily Inspection and Maintenance
-56-
7.7 Connecting the USB Cables
1 Turn OFF the power of the retinal camera.
Press the power switch of the retinal camera to the O side (OFF).
2 Remove the power plug from the AC outlet.
3 Connect the USB cables to the main unit.
Insert the USB cables connector firmly into the USB connectors while holding down the main unit
with your hand.
4 Connect the USB connectors at the other end to the computer.
Connect the connector at the other end of the USB cable firmly into the computer’s USB ports.
Note: Use the following type of USB cable. Communication may not be possible if any other kind
of cable is used.
• Cable with type AB connector plug supporting USB 2.0 Hi-Speed, maximum length of
3 meters
For further details, contact your sales representative or local Canon dealer.
Note: When connecting the USB cable, pass it underneath the cables of the camera main unit,
and connect.
If it is passed over the main unit cables, the USB cable may become disconnected by the
image-taking operations of the main unit.
000_L-IE-5152E_CF-1.book Page 56 Monday, July 29, 2013 10:30 AM