Canon XEED WUX450 - Manual (Page 134)

Connection Procedure
134
Connecting a Computer
Connect the projector to the computer.
A digital connection (
P135 ) is recommended when projecting an image in high
quality.
When using a computer with an HDMI output terminal, a digital connection (
P136 )
can be made using an HDMI cable.
■ Connecting to RGB Monitor Output Terminal (Analog
Connection)
Connecting with a computer cable (Input signal type: [Analog PC-2] P51 )
Connecting with VGA-DVI cable (Input signal type: [Analog PC-1] P51 )
Before connecting the cables, turn off both the projector and computer.
Monitor output terminal
(Mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
Computer cable
(supplied)
When inputting corresponding audio
Audio cable (not included)
To ANALOG PC-2 /
COMPONENT terminal
To AUDIO IN terminal 2
Computer Projector
Monitor output terminal
(Mini D-sub 15-pin)
AUDIO output terminal
(AUDIO OUT)
VGA-DVI-I cable
(not included)
When inputting corresponding audio
Audio cable (not included)
To ANALOG PC-1 / DVI-I terminal
To AUDIO IN terminal 1
Computer Projector