Completing computer settings, Setting pjlink [pjlink – Canon XEED WUX450 User Manual
Page 187
187
Completing Computer Settings
Inst
alla
tio
n
an
d Main
te
na
nce
Con
necting
to a Networ
k
Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer
to “Displaying the Network Configuration Screen” (
). For information about
PJLink, refer to “What is PJLink?” (
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron Controller]
From [Crestron Controller] in the settings screen, you can set parameters for
communication via controllers manufactured by Crestron Electronics.
Item
Explanation
Factory default
setting
PJLink
Turn the PJLink function on or off. If
OFF is selected, the PJLink function
will be turned off and the other settings
in this screen cannot be changed.
ON
PJLink authentication
Select whether to turn the PJLink
authentication function on or off. If OFF
is selected, [Password] and [Confirm
password] cannot be changed.
ON
Password
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
system
Confirm password
For confirmation, enter the same
password that you entered in
[Password].
system