American Audio CDI-300 - Manual (Page 12)

GENERAL FUNCTIONS AND CONTROLS (Cont.)
© American Audio ® - www.AmericanAudio.us - CDI-300™ Instruction Manual Page 12
Figure 5
Figure 4
AUDIO OUT DIGITAL
OUT
POWER
ON OFF RELAY
AC IN~
230V 115V
23
29
28 27 26 25 24
B. REAR PANEL (FIGURE 4)
23. VOLTAGE SELECTOR - Because power
supplies vary from location to location we have
incorporated a selectable voltage switch. This
switch can select a voltage input of 120v~60Hz
or 220v~50/60Hz. Always disconnect the power
plug before changing the voltage.
24. POWER CONNECTOR - This connection is
used to connect your main power. Be sure that
your local power matches the unit’s required
power.
NEVER REMOVE THE GROUND PRONG
FROM THE POWER CABLE, DOING SO MAY
RESULT IN IMPROPER OPERATION.
25. POWER BUTTON - This button is used to
turn your unit’s power on and off.
26. CUE MINI JACK - Connect the supplied
mini-plug from the CUE jack on the rear of your
unit to a compatible American Audio® mixer’s
CONTROL out. This feature is only available on
American Audio’s “Q” series mixers.
27. DIGITAL OUT - Use this connection to create
near perfect copies of your disc to a Mini disc,
CD-R, or any other digital recording device.
28. AUDIO OUT R & L - Audio out signals.
Connect stereo RCA cables from AUDIO OUT to
a mixer's line input.
C. FRONT PANEL (FIGURE 5)
29. TRANSPORT TRAY - This tray is used to load
and unload a compact disc. The tray is opened
and closed by pressing the OPEN/CLOSE BUT-
TON (12). Never attempt to force the transport tray
open or closed when the power is turned off.