Bosch WAP24202UC - Manual (Page 20)

20
Starching
NOTICE: Laundry must not be treated with fabric
softener.
Starching is possible in all wash programs if liquid starch
is used. Measure starch into compartment M in
accordance with the manufacturer's instructions (clean
first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities.
Salt may damage stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to bleach clothes.
Soaking
1. Pour soaking agent/detergent into compartment II in
accordance with the manufacturer's instructions.
2. Turn the program selector to Cotton Normal Cold
program.
3. Press Start/Pause.
4. After approx. ten minutes, press Start/Pause.
5. After the required soaking time, press Start/Pause
again to continue or change the program.
NOTICES
▯
Load laundry of the same color.
▯
No additional detergent is required; the soaking
solution is used for washing.
Whitest/Whites full load Extra hot
Hot
Warm
Cold
High
Medium
Low
No spin White sturdy fabric, cotton or
linen fabric that withstands
very hot water
Easy Iron, Prewash/Pre Treat
Heavy Duty full load Extra hot
Hot
Warm
Cold
High
Medium
Low
No spin For heavily to lightly soiled
(white) cottons, household lin-
ens, work and play clothes.
Easy Iron, Prewash/Pre Treat
Perm Press 1/2
load
Hot
Warm
Cold High
Medium
Low
No spin Cotton, linen synthetic or
blended fabrics
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat ;
reduce rinse and final spin
cycle
Tips
Do not wash new multicolored laundry together with other laundry.
The cycles are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load or select, e.g. Pre-
wash/Pre Treat.
Rinse cycles use cold water only.
For cycles with pre-wash, divide detergent into chamber I and II.
Cycles max.
Load
up to:
selectable cycle settings,
default settings (bold) Type of laundry additional cycle settings ;
Information
Temperature Spin speed