Attaching flue duct, Remove the protective foil from the flue ducts, Remove the protective foil from the extractor hood – Bosch HIB82651UC User Manual
Page 13: Fasten the upper flue duct using 6 screws, Install metal grease filter, Removing the appliance, Remove the metal grease filter, Loosen the flue duct, Disconnect the appliance from the power supply, Loosen the exhaust air lines
Advertising
13
Attaching flue duct
Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
1.
Remove the protective foil from the flue ducts.
2.
Remove the protective foil from the extractor hood.
3.
Fasten the upper flue duct using 6 screws.
4.
Position the lower flue duct on the extractor hood
using 4 plastic brackets. Use a plastic bracket for
each corner of the flue duct.
5.
Fasten the lower part of the flue duct using 4 screws.
6.
Install metal grease filter.
Removing the appliance
1.
Remove the metal grease filter.
2.
Loosen the flue duct.
3.
Disconnect the appliance from the power supply.
4.
Loosen the exhaust air lines.
5.
Loosen screws for fastening the appliance.
6.
Remove the appliance.
Advertising