Water Inc HP - 9100TS User Manual

9100ts quick start

Advertising
background image

9100TS

QUICK START

INSTALL 9100TS ACCORDING TO MANUAL AND LOCAL PLUMB-

ING CODES

SLOWLY TURN ON INCOMING SIDE OF BYPASS

WAIT FOR WATER TO FILL TANK AND AIR TO STOP

PUSH AND HOLD “REGENERATE” TO START CYCLE

IMMEDIATELY AFTER THE VALVE STARTS –PUSH AND HOLD

THE “SET” AND “UP” BUTTONS

THE “HOUR GLASS” ICON WILL START FLASHING

THE VALVE WILL NOW CYCLE THROUGH TO THE END WITH-

OUT STOPPING

REPEAT TWICE ON EACH TANK

ADJUST HARDNESS SETTING

OPEN OUTGOING SIDE OF BYPASS VALVE

CHECK FOR LEAKS

ADD SALT TO THE BRINE TANK

1 2 3 4

Figure 5

1. SET. Used to accept a setting that nor-

mally becomes stored in memory. Also

used together with the arrow buttons.

2. DOWN arrow. Generally used to scroll down

or decrement through a group of choices.

3. UP arrow. Generally used to scroll up or in-

crement through

a group of choices.

4. REGENERATE OR EXTRA CYCLE. Used to

command the controller to regenerate.

800.322.WATER(9283) ● waterinc.com

Advertising