LUMATEQ LK848-20-110-00 - Manual

LUMATEQ is a division of TACO Metals, Inc.
To view the entire portfolio of LUMATEQ products and for Warranty and Product Information, go to lumateq.com
Corporate Headquarters 50 NE 179 Street, Miami, FL 33162 • 305.770.2392 • Fax: 305.653.8569 ©2014 All Rights Reserved
INSTRUCTIONS
Connecting Terminals
Front Lens
LED Tubes
Lampholder
Tube Fixing Board
Fixing Pole
Wire Gland Cap
Wire Gland
Wire Gland
Wire Gland Bottom
Back Cover
Front Wall Fixing Clip
Back Wall Fixing Clip
Lens and Back Fixing Clip
Screw
Wire
Preparation
• Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with the
package contents list and diagram.
• If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service at
305.770.2392 or visit our website at www.LUMATEQ.com for replacement parts.
Dimension /
Content
Caution
• Risk of fire/electrical shock. If not qualified, consult an electrician.
• Disconnect power at fuse or circuit breaker before installing or servicing.
• Edges may cut. Handle with care.
• UL Listed for indoor use only.
• Connect fixture to 110-277 volt, 60 Hz power source. (Any other connection may void warranty.)
• A qualified electrician or person with experience in household wiring should install this fixture. The electrical system and the
method of connecting to electricity must be in accordance with the National Electrical Code and local building codes.
• Keep away from flammable objects. Do not position fixture within one inch of any combustible materials.
• Your light fixture is pre-wired for easy installation.
• This fixture is rated for 50,000 hrs. When inside LED tubes need to be replaced, please contact LUMATEQ to get new tubes.
Use of any other tubes will void the warranty.
• To avoid hazard to children, account for all parts and destroy packing materials.
WARNING
Vapor Proof Kit (LK848-20-110-00)
49.5"
33.0"
4.0"
4.0"
6.0"
*non-submersible