Allied Telesis RAPIER I - Manual (Page 105)

Software Version 2.8.1 105
Software Version 2.8.1
C613-10477-00 REV B
Command Reference Updates
This section describes each new command and the changed portions of
modified commands and output screens. For modified commands and output,
the new parameters, options, and fields are shown in bold.
add bgp peer
Syntax ADD BGP PEer=ipadd REMoteas=1 .. 65534
[AUthentication={MD5|NONE}] [CLIEnt={NO|YES}]
[CONnectretry={DEFault|0 .. 4294967295}]
[DEFaultoriginate={NO|YES}]
[DESCription={NONE|description}]
[EHOps={DEFault|1 .. 255}] [FASTFallover={NO|YES}]
[HOLdtime={DEFault|0|3 .. 65535}]
[INFilter={NONE|prefixlist-name}]
[INPathfilter={NONE|1 .. 99}]
[INRoutemap={NONE|routemap}]
[KEEpalive={DEFault|1 .. 21845}]
[LOCal={NONE|1..15}] [MAXPREFIX={OFF|1 .. 4294967295}]
[MAXPREFIXAction={Terminate|Warning}]
[MINAsoriginated={DEFault|0 .. 3600}]
[MINRouteadvert={DEFault|0 .. 3600}]
[NEXthopself={NO|YES}]
[OUTFilter={NONE|prefixlist-name}]
[OUTPathfilter={NONE|1 .. 99}]
[OUTRoutemap={NONE|routemap}] [PASSword=password]
[PRIVateasfilter={NO|YES}] [SENdcommunity={NO|YES}]
ADD BGP PEer=ipadd POLICYTemplate=1..30 REMoteas=1..65534
[AUthentication={MD5|NONE}] [DEFaultoriginate={NO|YES}]
[DESCription={NONE|description}]
[EHOps={DEFault|1 .. 255}] [FASTFallover={NO|YES}]
[PASSword=password]
Parameter Description
DESCription A description of the peer, which has no effect on its operation.The
new none option allows you to not specify a description, or remove a
previously specified description.
Default:none
INRoutemap The route map that filters and/or modifies prefixes from this peer. The
new none option allows you to not specify a route map, or remove a
previously specified route map.
Default: none
OUTRoutemap The route map that filters and/or modifies prefixes sent to this peer. The
new none option allows you to not specify a route map, or remove a
previously specified route map.
Default: none