Allied Telesis RAPIER I - Manual (Page 44)

44 Switching Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
show switch filter
Syntax SHow SWItch FILter [POrt={port-list|ALL}]
[ACtion={FORward|DIScard}] [DESTaddress=macadd]
[ENTry=entry-list] [VLAN={vlan-name|1..4094}]
Description This command displays information about Layer 2 switch filters.
Figure 8: Example output from the show switch filter command
show switch hwfilter
Syntax SHow SWItch HWFilter [CLASSifier=classifier-list]
Description This command displays information about the configuration of hardware
filtering on the router or switch, and a summary of the current filters.
Figure 9: Modified example output from the show switch hwfilter command
Switch Filters
---------------------------------------------------------------------------
VlanSecure ................ ENABLED
Entry VLAN Destination Address Port Action Source
---------------------------------------------------------------------------
0 default (1) aa-ab-cd-00-00-01 1 Forward static
1 default (1) aa-ab-cd-00-00-02 1 Forward static
0 marketing (2) aa-ab-cd-00-00-01 2 Discard static
1 marketing (2) aa-ab-cd-00-00-02 2 Discard learn
---------------------------------------------------------------------------
Table 7: New parameter in output of the show switch filter command
Parameter Meaning
VlanSecure Whether vlansecure mode is ENABLED or DISABLED.
Standard filtering behaviour is ENABLED.
Switch Hardware Filter Summary Information
------------------------------------------------------------
Number of Filters .... 12
Status ............... ENABLED
Mode ................. NPSF
Filter ............... 1
Classifier ........... 3
Filter ............... 2
Classifier ........... 100
Filter ............... 3
Classifier ........... 101
------------------------------------------------------------