Quick reference guide, Astroflex electronics – Astroflex VKE-103 User Manual
Page 8
QUICK REFERENCE GUIDE
Locking (1)
To lock the system press
for one second. The doors will lock (if connected). The LED will begin to
flash. The Failsafe® Starter Kill will prevent the vehicle’s starter from cranking if it has been installed.
The vehicle’s horn (if connected) will honk and the parking lights will flash once to confirm locking of
the system.
Unlocking (1)
To unlock the system press
for one second. The doors will unlock (if connected). The Failsafe®
Starter Kill will be deactivated and the vehicle’s horn (if connected) will honk twice and the parking
lights will flash twice.
AED disabling
Turn the ignition to the ON position. Turn the ignition back off. Press and release the Valet® switch within 10
seconds. The status LED will light steadily if you have entered Valet® Mode. To exit Valet® Mode, repeat the
steps above. The LED will turn off when exiting Valet® Mode.
To activate
Panic Mode
Press and hold
or
for more than 5 seconds.
To exit
Panic Mode
Press
or
for 1 second.
Location of
Valet Switch
The valet switch is located :
Note down where the valet switch is located inside the vehicle.
(1) The installation of these functions may require additional optional parts or labour.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
The company behind this system is Astroflex Electronics, member of Directed Electronics, Inc.
Call (888) 892-7876 for more information about our products and services.
Astroflex Electronics is committed to delivering world class quality
products and services that excite and delight our customers.
Astroflex Electronics
Sherbrooke, Qc (Canada) J1R 0L1
© 2006 Astroflex Electronics – All rights reserved
UEVKE103 1206
© 2006 Astroflex Electronics – All rights reserved
6