Asus O!PLAY HD2 E5763 - Manual (Page 54)

Chapter 3: Using your O!Play HD2 media player 3-10
Configuring the audio playback settings
The audio playback setting menu allows you to configure the audio settings such
as Repeat options and Shuffle Loop.
To configure the audio playback settings:
1. During playback, press
to
launch the audio playback setting
menu.
2. Press the up/down keys / to
navigate to the the function that
you want to configure. Press to
confirm the selection.
You may turn on Night Mode to listen to music at night, but not disturbing the
others.
If you want to configure the Digital Output, refer to the following for the
descriptions of the options:
• HDMI LPCM (Default): Select this option when connecting your TV to
the HDMI port of the media player.
• HDMI RAW: Select this option for the multichannel audio receiver. The
RAW data of the audio will be sent to the HDMI multichannel receiver for
decoding.
• SPDIF LPCM: Select this option for the S/PDIF audio receiver.
• SPDIF RAW: Select this option for the S/PDIF multichannel audio
receiver. The RAW data of the audio will be sent to the S/PDIF
multichannel receiver for decoding.
To configure the audio settings from the Setup mode:
1. From the Home screen, press the
left/right keys / to navigate to
Setup, then press .
You may also press to launch
the Setup menu.
2. Navigate to Audio, then press the
right key to allow you to select the
audio settings.