LG M3202C-BA - Manual (Page 28)

27
Clock
Adjusting the timer function
In the event of power interruption (disconnection or power failure), the clock must be reset.
Once the on or off time is set, these functions operate daily at the preset time.
Off time function overrides On time function if they are set to the same time.
When On time is operated, input screen is turned on as it was turned off.
Note
If the current time is incorrect, reset the clock manually.
1) Press the MENU button and then use button to select the Time menu.
2) Press the button and then use button to select the Clock menu.
3) Press the button and then use button to set the hour(00~23).
4) Press the button and then use button to set the minutes(00~59).
On/Off Timer The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use button to select the Time menu.
2) Press the button and then use button to select On/Off Timer.
3) Press the button and then use button to set the hour(00~23).
4) Press the button and then use button to set the minutes(00~59).
5) Press the button and then use button to select On or Off.
Sleep Time The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use button to select the Sleep Time menu.
2) Press the button and then use button to set the hour(00~23).
3) Press the button and then use button to set the minutes(00~59).
User Menus
Power On
Delay When connecting multiple monitors and turning the power on, the monitors are
turned on individually to prevent overload.
MENU
Time
Clock
On/Off Timer
Sleep Time
Auto Sleep
Power On Delay
_ _ : _ _ AM
Auto Sleep If Auto Sleep is active and there is no input signal, the set switches to off mode
automatically after 10 minutes.
1) Press the MENU button and then use button to select the Auto Sleep menu.
2) Press the button and then use button to select On or Off.