Maintenance, Care &cleaning, Changing the oven light – LG LRE30451ST User Manual

Page 26: Painted and body parts, and decorative trim, Stainless steel surfaces (on some models), Broiler pan and grid, Oven racks, Caution

Advertising
background image

- 26 -

English

Español

MAINTENANCE

CARE &CLEANING

Changing the Oven Light

The oven light is a standard 40-watt appliance bulb. It will
come on when the oven door is open. When the oven door is
closed, press OVEN LIGHT to turn it on or off. It will not
work during the Self-Clean cycle.

To replace:

• Make sure oven and bulb are cool.

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of

the oven counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb and bulb cover by turning clockwise.

5. Plug in range or reconnect power.

Painted and Body Parts, and
Decorative Trim

For general cleaning, use a cloth with hot and soapy water.
For more difficult soils and built-up grease, apply a liquid
detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry. DO NOT use
abrasive cleaners on any of these materials; they can scratch.

Stainless Steel Surfaces (on some
models)

Do not use a steel-wool pad; it will scratch the
surface.

1. Shake bottle well.

2. Place a small amount of Stainless Steel Appliance Cleaner

or polish on a damp cloth or damp paper towel.

3. Clean a small area, rubbing with the grain of the stainless

steel if applicable.

4. Dry and buff with a clean, dry paper towel or soft cloth.

5. Repeat as necessary.

Broiler Pan and Grid

Do not clean the broiler
pan or grid in a self-
cleaning mode.

After broiling, remove the
broiler pan from the oven.
Remove the grid from the pan.
Carefully pour out the grease
from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot
water with a soap-filled or plastic scouring pad.

If food has burned on,sprinkle the grid with cleaner while
hot and cover with wet paper towels or a dishcloth. Soaking
the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a
commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a
dishwasher.

Oven Racks

Remove the oven racks
before operating the Self-
Clean cycle. Leaving the
racks in place could cause
discoloration, and, if food
is spilled into the tracks,
could causes the racks to become stuck. If left, clean by using
a mild, abrasive cleaner. Rinse with clean water and dry.

If the racks are cleaned in the Self-Clean cycle, their color
will turn slightly blue and the finish will be dull. After the
Self-Clean cycle is complete, and the oven has cooled, rub
the sides of the racks with wax paper or a cloth containing a
small amount of oil. This will make the racks glide easier into
the rack tracks.

Do not store a soiled broiler

pan and grid anywhere in the

range.

• Before replacing your oven light bulb, disconnect the

electrical power to the range at the main fuse or circuit
breaker panel.

• Make sure oven and bulb are cool.

CAUTION

If a mineral oil-based stainless steel appliance cleaner has
been used before to clean the appliance, wash the surface
with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.

Note:

Advertising
This manual is related to the following products: