Removing back cover, Installing the battery, sim card and microsd card, The basics – LG VS930 User Manual

Page 16: Installing the battery

Advertising
background image

14

The Basics

Removing Back Cover

Insert your fingertip under the ledge at the bottom of the phone and gently
lift back the cover to remove it.

The back cover is compatible with a wireless charging pad (sold separately)
which allows you to charge your device wirelessly.

* To purchase a wireless charging pad, please visit vzw.com/chargewithoutwires or a Verizon

Wireless retail store.

Installing the Battery, SIM Card and microSD Card

NOTE

It is important to fully charge the battery before initial use of the phone.

WARNING!

Your device includes a heat sensor activated by the battery temperature. A pop-up

message will be displayed if the device turned itself off or stopped charging as in the

following cases:











ţ

Your phone may turn itself off when the battery temperature becomes too high (above

60°C) during use.











ţ

Charging may stop temporarily when the battery temperature becomes too high

(above 55°C) or too low (-10°C).

Installing the battery

The phone comes with a rechargeable battery. Keep the battery charged
while not in use in order to maximize talk, use, and standby time. The
battery charge level is shown at the top right corner of the screen.

1 Insert your fingertip

under the ledge at the
bottom of the phone
and gently lift back the
cover to remove it.

2 Align the battery contacts

with the terminals in the
battery compartment and
push the battery down
until it clicks into place.

3 Place the back cover

over the battery
compartment, then
press downward until it
clicks into place.

Advertising
This manual is related to the following products: