LG LSC23924ST - Manual (Page 10)

REFRIGERATOR INSTALLATION
10
Reinstalling the rigth (Refrigerator) door
2. Fit top hinge (4) over hinge lever latch (5) into place.
3.
1. Place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
3. Install the grounding screw (4) and connect all the
4. Hook tab on door switch side of cover (2) under edge
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
Reinstalling the left (Freezer) door
5. Reconnect the water tubes by inserting the tubes into
NOTE: Regardless the type of hinge lever (5);
type1: without rivet or type 2: with rivet the
removal process is the same.
NOTE: Regardless the type of hinge lever (3);
type1: without rivet or type 2: with rivet the
removal process is the same.
Hook tab on switch side of corner under edge of wire
(5)
Rotate lever (3) counterclockwise to secure hinge.
opening in cabinet top. Position cover (2) into place.
Insert and tighten cover screw (1).
place. Rotate lever (5) clockwise to secure hinge
wire harnesses (3).
of wire opening in cabinet top. Position cover into
place. Insert and tighten cover screw (1).
(1
(6)
the connectors.
)
(4)
(2)
(7)
Type 1
(1)
Type 1
(3)
(3)
(4)
(5)
(5)
(6)
Type 2
Rivet
(4
(2)
)
(5)
Type 2
(3
(7)
)
Rivet
Insert Line
Tube
Collet