Arning, Refrigerator installation – LG LSC23924ST User Manual

Page 9

Advertising
background image

REFRIGERATOR INSTALLATION

9

Removing the left (freezer) door with water line
connection.

Pull up the water feed tube while pressing area
(Figure 1) as shown in the figure below.

If a tube end is deformed or abraded, trim the part

away. Disconnecting the tube under the door
causes about 0.13 gallons (1.5 liters) water to flow
out. Put a large container at end of tube to prevent
water from draining onto the floor.

NOTE:

Figure 1

1. Open the door. Remove the top hinge cover screw (1).

2. Use a flat blade screwdriver to pry back the hooks

(not shown) on the cabinet underside of the cover (2).

Lift up the cover.

3. Disconnect all the wire harnesses (3).

4. Remove the grounding screw (4).

5. Rotate hinge lever (5) counterclockwise

. Lift the top

C

A

U

T

I

O

N

:

When lifting the hinge free of the latch,

be careful that the door does not fall forward.

hinge (6) free of the hinge lever latch (7).

(1)

(2)

(3)

(5)

(6)

(7)

(4)

Type 2

Type 1

(6)

(5)

Rivet

NOTE: Regardless the type of hinge lever (5);
type1: without rivet or type 2: with rivet the
removal process is the same.

(7)

C

A

U

T

I

O

N

:

When lifting the hinge free of the latch,

Rotate the hinge lever (3) clockwise

. Lift the top hinge

(not shown) on the cabinet underside of the cover (2).

5. Place the door, inside facing up, on a nonscratching

air vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.

1. Open the door. Remove the top hinge cover screw

2. Use a flat blade screwdriver to pry back the hooks

Rivet

before installing. Failure to do so could result in

• Do not put hands or feet or other objects into the

Before remove the doors, remove the Base Grille.
See BASE GRILLE INSTALLATION for reference.

To remove the right (refrigerator) door:

• Disconnect electrical supply to the refrigerator

• Be careful when you work with the hinge, base

NOTE: Regardless the type of hinge lever (3);
type1: without rivet or type 2: with rivet the
removal process is the same.

be careful that the door does not fall forward.

Type 2

)

(3

ARNING

grille, and stopper. You may be injured.

Electric Shock Hazard

4. Lift the door from the lower hinge pin.

(5)

REMOVING AND REPLACING

(2)

(4) free of the hinge lever latch (5).

(4)

REFRIGERATOR DOORS

(5)

(4)

W

death or serious injury.

(3)

Type 1

Lift up the cover.

(1)

surface.

(1).

3.

7. Place the door, inside facing up, on a nonscratching

surface.

6.

being careful to

Lift the door from the lower hinge pin

pull the water lines through the lower hinge pin.

Advertising
This manual is related to the following products: