LG 37LD665H - Manual (Page 120)

120
APPENDIX
A
PP
EN
D
IX
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB(Set-Top Box) and press the corresponding mode button (such as a STB) on the
remote control, while pointing at the component. Test the POWER and CH
ὤ㨴㥄
ὤ㨴㥄
buttons to see if the
component responds correctly. If the component does not operate correctly, the remote control requires
programming to operate the device.
2
Turn on the component to be programmed, then press the corresponding mode button (such as STB) on
the remote control. The remote control button of the desired device is illuminated.
3
Press the MENU and MUTE buttons simultaneously, and the remote control is ready to be programmed
with the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the MENU button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
PROGRAMMING THE REMOTE CONTROL