LG 37LD665H - Manual (Page 149)

10 206-4200
Installer Remote Control Typical Key Functions
1 2 3
4 5 6
7 8 9
0
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
PIP CH- PIP CH+ PIP SWAP PIP INPUT
PIP SAP
FLASHBK
REMOVE
ALPHA/NUM
P
A
G
E
MUTE
TIMER
MENU RETURN
VOL CH
POWER
GUIDE
INPUT
CC
ENTER
TV DVD
VCR STB
&@
.:/,
RATIO
PORTAL INFO i
NUMBER Buttons (0 - 9) & DASH
Use to enter a program number or channel.
Dash is used for sub-channel numbers such
as 2-1, 2-2, 9-1, 9-2, 100-3, 100-4, etc.
FLASHBK (FLASHBACK)
Returns to the previously tuned channel.
RATIO
Adjusts the picture aspect ratio.
TIMER
Sets the amount of time before the TV
automatically turns itself OFF.
SAP
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes the
audio language, if additional languages are
available. *
The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated
below and throughout this document shows typical remote control functions and is provided for reference only.
This Installer Remote may vary from the Installer Remote supplied with the TV.
DVD/VCR BUTTONS
Control some LG DVD/VCR products.
(RECORD button not functional in DVD
mode.)
Color buttons access special functions
in some menus.
VOLUME UP/DOWN
Increases/decreases sound level.
CC
Press to activate subtitles.
MUTE
Switches sound ON or OFF.
CHANNEL/PAGE UP/DOWN
Changes the channel. Moves from
one full set of screen information to
the next.
Arrows (Up/Down/Left/Right) & ENTER
Use to navigate on-screen menus and adjust
TV settings to your requirements.
RETURN
Returns one level to the previous menu/display.
MENU
Displays the TV setup menus on the screen.
Also exits the on-screen menu system and
returns to TV viewing.
INPUT
Selects RGB, HDMI/DVI1, HDMI2, Component
Input, AV1, and AV2 sources.
GUIDE
Displays and removes the electronic
program guide.
PORTAL
Displays and removes the interactive
menu.
INFO
Displays channel information.
PIP
Toggles through PIP options.
PIP CH +/-
Changes the PIP channel.
PIP SWAP
Exchange the main/sub images.
PIP INPUT
Select the connected input source for the
sub-picture.
TV/STB/DVD/VCR
Select the remote’s operating mode: TV, STB,
DVD, or VCR.
POWER
Turns TV or any other programmed equipment
ON or OFF, depending on mode.
SAP notes:
•
If SAP is selected and no SAP is provided, sound
may not be heard on channel.
• Each analog channel may have its own SAP setting.
• Digital channels will reset to default audio language
with a power off/on.
*