Home monitoring camera port setup – LG N1A1DD1 User Manual

Page 100

Advertising
background image

100

- Set IP and port when accessing a camera in the internal network(LAN) of the router.

WAN IP:10.177.192.69

※ IP in the figure below is an example to facilitate your understanding.

1) Camera setting value on home Monitoring web menu

Name

USB Camera 1 192.168.0.25 tcp

9080-9080

9080-9080

Internal IP

Protocol

External Port

Internal Port

USB Camera 1
Port: 9080(Use a value automatically assigned)

(Encouraged: 9080 ~ 9089)

USB Camera 1 : Because, the USB camera is connected to Network Storage,

it is using the same IP address as the Network Storage.

Therefore, the internal port number must use a different port number

than the number 80 port, which the Network Storage is using.

That is, you should use the port number that is automatically set

.

e.g.) Connect to http://10.177.192.69:9080 from an external network -> Automatically

connect to internal network http://192.168.0.25:9080.

2) Set up a router

※ This is an example of how to set a port forward for a router.

Home Monitoring Camera Port Setup

In order to access the installed USB camera in the internal network router from

an external network router, you must set port forwarding on the camera from the

router’s setup menu.

Advertising
This manual is related to the following products: