Approach Tech DVR-3024M - Manual (Page 17)

15
00 :00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
REC SCHEDULE
OK
START END
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
00:00- 00:00
START END
CANCEL
S
M
T
W
T
F
S
TO MOVE TO CHANGE
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO CLOCK/ TIMER PAGE
CLOCK
DAYLIGHT SAVING
REC ENABLE
TIMER
SEQUENCER
TITLE
TIMER/ SEQ/ TITLE
MAIN PAGE
: SET
: OFF
: OFF
:
SET
: SET
: SET
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO CLOCK/ TIMER PAGE
CLOCK
DAYLIGHT SAVING
REC ENABLE
TIMER
SEQUENCER
TITLE
TIMER/ SEQ/ TITLE
MAIN PAGE
: SET
: OFF
: ON
: SET
: SET
: SET
3.2 Recording Operations
This section details the way to record video
into hard-disk drives. Before commencing with
the recording function, please configure the
recording setting properly according to your
needs.
3.2.1 Manual Recording
Take the following steps to start and stop
recording:
(1) Press the REC button 6 to record video
into a hard disk drive with the corresponding
programmed recording settings. The REC
button 6 will light up indicating the DVR is
in the recording status.
(2) Press the REC button 6 for 3 seconds to
stop recording any time.
(3) To access just recorded video, please refer to
section 3.4 for more details.
3.2.2 Timer Recording
Timer recording provides
2
periods of time
each day in a weekly table which programs
the DVR to turn on and off at specified times.
This way the DVR will start/ stop recording
according to the programmed schedule.
(1) Press the Setup button 9 to enter the
MAIN MENU.
(2) Select the CLOCK / TIMER and press the
Enter button 15 to enter the CLOCK /
TIMER page.
(3) Select the TIMER－SET.
(4) Press the Enter button 15 to enter the REC
SCHEDULE table.
(5) You can set up by using the “<” button 11
and the “>” button 14 to locate the specific
day/hour/minute and use the “ ^ ” button 12
and the “v” button 13 to set the
day/hour/minute you wish.
You can also set up by using the Shuttle
Ring and the Jog Dial. is the equal of
the “<” button 11 , is the equal of the
“>” button 14 , is the equal of the “ ^ ”
button 12 and is the equal of the “v”
button 13 .
The time is displayed in a 24-hour clock
format.
(6) After scheduling is completed, press the
Enter button 15 and set OK to save the
setting or select CANCEL to leave the page
without saving.
(7) To activate/ deactivate the programmed
recording schedule, set the REC ENABLE
to ON/ OFF. As the scheduled recording is
on, the red indicator of the Timer Record 17
will be on as well.