Hippo Wireless Stereo Headphones for Mobile Professionals - Manual (Page 14)

Step 3: Streaming music
Launch the desktop music player software on your PC/Mac and play your favourite music.
You should now be able to hear the music on your headphones.
Note 1: If you were already playing music player, stop the music (press stop button on the
music player) and play again. This is needed for the music player to recognize the sound
stick. Alternately, you can exit the music player, re-launch and play the music again.
Note 2: For best results ensure that you are within 25 feet (8 meters) from your PC or Mac.
If you hear breaks in audio, use the USB Extension Cable provided with your headphones
to place the sound stick in visible range from the headphones.Plug one end of USB
Extension cable to the USB slot on your PC/Mac and plug the sound stick to the other end
of the extension cable.
Turning OFF your iWiSH Headphones
You can turn OFF the headphones by pressing the Multifunction button continuously for 3
seconds. On pressing the Multifunction button, you will hear a shutdown tune on the
headphones. Release the button once the Power LED (Red) starts glowing.
To remove the sound stick from PC or Mac, first stop the music player and then plug out
the sound stick from the USB slot.
Note: Should your headphones stop working for any reason, and you are unable to turn
OFF your headphones using the Multifunction button, please press the Soft Reset button
(refer to Fig 3) using a sharp object like a pencil. This would turn OFF the headphones. To
use again, turn ON the headphones using the Multifunction button.
14