LG 32PC5RV - Manual (Page 13)

ATTACHING THE TV TO A WALL
11
PREP
AR
AT
ION
USE POWER CORD HOLDER
After connecting the power cord to the AC input
terminal, remove the bolt at the hole on the back
cover and fix the power cord at the rear side of the
TV by using the bracket for fixing the power cord.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■ Insert the eye-bolts or TV brackets and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■ Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
■ This feature is not available for all models.
■ Here shown may be somewhat different from your TV.