LG UBVB1GS01L - Manual (Page 10)

10
Uninstalling the software:
To remove the installed software, you can click the windows [Start] menu and select [Setting],
[Control Panel] and [Add/Remove Programs]. The application software can also be uninstalled by
clicking the [Start] menu and selecting [Programs], [LG USB Drive], [Uninstall LG USB Drive].
¾
The USB driver will be required to install, as the device links the PC by the USB port at the fist
connection. After then, the drive installation is not required.
¾
Do not cancel the installation during the procedure. The LG USB Drive may not operate
correctly if the installation is incomplete.
¾
Read the “Troubleshooting” Section if the installation cancels itself during the procedure, if the
installation did not proceed as described, or if you feel that the driver are not properly installed.
Installing the USB Drive:
For some Windows system, users should log on as the Administrator before installation. Once you
have attached the USB Drive to the computer. The OS will find the appropriate driver or the “Add
New Hardware Wizard” dialog will appear after a moment. You can do the installation of the Driver
manually. Or just find out the “LG USB Drive.exe” program to do the driver installation.
During the installation procedure, if the “Digital Signature Not Found” message displays, just click
the [Yes] button in the showing window.
For Microsoft Windows 98/98SE, you can download it from http://www.lge.com/.
Installing/Using LG USB Drive in Microsoft Windows 98/98SE
Note: