LG UBVB1GS01L - Manual (Page 7)

7
3. Select to remove hardware.
4. When your computer indicates it is acceptable to remove hardware, then unplug the USB Drive
from the USB port.
Basic Information ★
The USB Drive may be partitioned into three types of disk. We will use the following terms in this
guide:
1. Public Area There is no “Security” function at all. You can do any basic functions,
described in the “Basic Functions” section, in this area.
2. Security Area This area cannot be viewed without the application software. Once you do
the “Log In” action in the application software, you will switch view from
“Public Area” to “Security Area”. After successful switch, you can do any
basic functions, described in the “Basic Functions” section, in this area.
☞ You can only view either “Public Area” or “Security Area” at the same time
in the same disk logic unit number(LUN).
In USB Drive, you can select the following partition combinations:
1. Single Public Area: Make all the device area accessible by everybody.
2. Security Area:
Make the device area into two partitions in the same LUN, Public Area and Security Area.
Everybody can access the Public Area. The Security Area can be accessed “Only” with a
password.
3. Public Area Plus Security Area:
Make the device area into three partitions in two LUNs, Public Area and Security Area in LUN0
and Public Area in LUN1.
Partition Type
Caution: Never remove or unplug USB Drive while the Red Status LED is flashing. Doing this may
cause corruption of the data being transferred.