AT&T 1165 - Manual (Page 12)

10
Telephone Operation
Press PROG
to begin programming
Press
^
or
V
to display
features one by one
Press SELECT to modify a
displayed feature
To stop at any time, press OFF
Customizing your telephone
Follow the steps below to program the telephone. To
stop at any time, press
OFF
. If the phone rings, program-
ming stops automatically so you may answer the call.
Choose ringer sound
1 Press
PROG
to begin programming.
2 Press ^ until screen displays RINGER & setting.
3 Press
SELECT
to change current setting:
4 Press ^ to display 1, 2, 3, 4, or OFF. You will hear
a sample of each ringing type.
5 Press
SELECT
to select displayed ringing type and exit.
Set handset display date and time
1 Press
PROG
to begin programming.
2 Press ^ until screen displays DATE/TIME .
3 Press
SELECT
to view or change date and time:
4 Press ^ or V to change month, then press
SELECT
.
5 Repeat Step 4 to set day, hour, minute, and AM/PM.
6 Press
SELECT
to save selection and exit.
RINGER: 1
DATE/TIME
1/01 12:00 AM
NOTE: You can choose to set the time manually, or you can allow it to
be set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company (see page 5).
Default setting: 1
Default setting:
1/01 12:00 AM
ATT-1465CIB-d04.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 10