Alert tones, Double beep every 5 seconds, 3 quick beeps – AT&T 1165 User Manual
Page 37: 1 double beep, Single beep, 1 long beep, Indicator lights, New call, In use/ charging, Display screen messages, lights and tones
35
Appendix
“Beep-Beep...Beep-Beep...”
(Double beep every 5 seconds)
Handset battery is low. Place handset in
base to charge the battery.
“Beep”
(Single beep)
Handset has registered with base and
can be used.
“Beeeeeeeeep”
(1 long beep)
Confirm tone (current operation has been
successfully completed).
“Beep-Beep-Beep”
(3 quick beeps)
Error tone (current operation has been
unsuccessful; try again).
Display screen messages, lights and tones
“Beep-Beep-Beep”
(3 quick beeps)
The handset is out of range. Move closer
to the base.
“Beep-Beep”
(1 double beep)
Handset has not registered with base.
Place handset in base to re-register.
Alert tones
Indicator lights
IN USE/CHARGING
Steady: Handset battery is charging
Slow Flashing: Phone is in use
Fast Flashing: Call is on hold
NEW CALL
If you have Caller ID service: On
when new calls have been received;
off when all new Caller ID records
have been reviewed (see page 20).
ATT-1465CIB-d04.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 35