LG PQNFB17B0 - Manual (Page 27)

How to install
5. Checking the network environment setting
Press the buttons by the following order. And then, when the following menu is displayed on the
BACnet Gateway LCD screen, press the “MENU/SELECT” button to check the set network
information.
The other information is displayed on the screen every 3 seconds.
(Order to display the information : MAC address
→ IP address → Gateway address → Net mask
address
→ Set BACnet Type)
4. Setting the Set BACnet Type
① Pres4s the button by the following order. When the following menu is displayed on the BACnet
Gateway LCD screen, press the "MENU/SELECT" button to enter the Set BACnet Type.
② Use the up/down/left/right button (▲,▼,◀,▶) to select the desired BACnet Type.
③ After selecting the BACnet Type, press the "MENU/SELECT" button to set the selected BACnet
Type to the Set BACnet Type.
MENU/
SELECT
[LCD screen]
Setting
Information
MENU/
SELECT
[MENU]
Set BACnet Type
[Set BACnet Type]
A ‘
MENU/
SELECT
[Example for setting the gateway Set BACnet Type]
[Set BACnet Type]
A ‘ B
MENU/
SELECT
[LCD screen after completing the setup]
BACnet Gate way
SW ver.1.0.0
Installation/Owner Manual 27
ENGLISH