7 exit menu, Password check [setup – Asus Motherboard A8V-MX User Manual

Page 81

Advertising
background image

A S U S A 8 V - M X

A S U S A 8 V - M X

A S U S A 8 V - M X

A S U S A 8 V - M X

A S U S A 8 V - M X

2 - 3 9

2 - 3 9

2 - 3 9

2 - 3 9

2 - 3 9

To set a User Password:

1.

Select the Change User Password item and press <Enter>.

2.

On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.

3.

Confirm the password when prompted.

The message “Password Installed” appears after you set your password
successfully.

To change the user password, follow the same steps as in setting a user
password.

Password Check [Setup]

Password Check [Setup]

Password Check [Setup]

Password Check [Setup]

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]

2.7

Exit menu

Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.

The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.

Select Screen
Select Item

Enter Go to Sub Screen
Tab Select Field
F1

General Help

F10 Save and Exit
ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

Advanced

Power

Boot

Exit

Exit Options

Exit & Save Changes
Exit & Discard Changes
Discard Changes

Load Setup Defaults

Exit system setup
after saving the
changes.
F10 key can be used
for this operation.

Advertising
This manual is related to the following products: