Altering the regional settings, Configuring array controllers – HP ProLiant DL380 Server User Manual
Page 11
Altering the Regional Settings
If your server is operating in a region other than the operating system default region,
you might need to alter the regional settings within Linux. The regional settings
control the keyboard language and set the local format for sorting and displaying the
time, date, number, and currency for a specified locale.
To alter the regional settings:
1. Log on to the server as
root
.
2. At the Red Hat Start menu, click System Settings>Date and Time.
3. Select the Date and Time and Time Zone tabs, and adjust these settings
appropriately for the server environment.
4. Click OK.
Configuring Array Controllers
To configure the array controllers:
1. Log in as
root.
2. Open a terminal emulation program.
3. If you want to use the Web-based Array Configuration Utility, access the
Array Configuration Utility from a local machine by entering
cpqacuxe
at the
command prompt. Refer to the “Web-Based Array Configuration Utility” section
to complete the array configuration.
If you want to use another configuration method, enter
cpqacuxe –h
at the
command prompt to view available configuration options. For more information
on using ACU-XE, refer to
HP Factory-Installed Operating System Software for Red Hat Enterprise Linux ES 3 User Guide
11
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 216361-005.doc
Codename: CTO Software Part Number: 216361-005 Last Saved On: 3/10/04 9:04 AM