150w pcie power cable option – HP ProLiant DL380 Server User Manual
Page 88
Cabling 88
17.
Install the server in the rack ("
Installing the server into the rack
" on page
18.
Remove any installed hard drives ("
Removing a hot-plug SAS or SATA hard drive
" on page
19.
Install a SATA hard drive ("
Installing a hot-plug SAS or SATA hard drive
) in hard drive bay
5.
20.
Install hard drive blanks in any empty hard drive bays.
21.
Connect each power cord to the server.
22.
Connect each power cord to the power source.
23.
24.
Using the HP ROM-Based Setup Utility (on page
), disable the embedded HP Smart Array P420i
Controller, if necessary.
150W PCIe power cable option
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI expansion cage.
Connect the cable as indicated: