Aiwa CDC-X417 - Manual (Page 8)

CDCX517MX417/X317(YU)-total-En-8
TROUBLESHOOTING
Error code
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve such problems. If the error code indication does
not disappear, consult an AIWA service center.
E01* The disc magazine is not properly inserted in the
CD Changer. Reinsert the magazine. Refer to
the instruction manual for the CD Changer.
E02* No CDs are loaded in the disc magazine. Insert
CDs properly. Refer to the instruction manual for
the CD Changer.
E03 Focus error. Check that the CD is loaded properly
(right side up, etc.), and the CD contains valid
data.
E04* Problem with the CD Changer. Reset the unit by
pressing the Reset button. If this does not solve
the problem, consult an AIWA service center.
* CDC-X517M only
Reset button
If a CD does not operate properly, press the reset button
with a pointed object such as a pencil, etc. Note that all
your settings will be erased if this button is pressed.
Reset button
MAINTENANCE
Cleaning the front panel
Wipe the surface with a soft, dry cloth.
Cleaning the connector
The connector needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab slightly
moistened with alcohol.
Back of the front panel
Press
t
r
and hold t , then
release it at the
desired point
and hold r , then
release it at the
desired point
DISC N
DISC M
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on the CDs in the disc magazine.
1 Press INT during CD Changer play.
“SCAN” appears in the display.
2 Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1 Press REP1 during CD Changer play.
“REPEAT1” appears in the display.
To cancel Repeat Play, press REP1 again.
One disc Repeat Play
You can play all tracks on a disc repeatedly.
1 Press REP during CD Changer play.
“REPEAT” appears in the display.
To cancel Repeat Play, press REP again.
Random Play
You can play all the tracks on the CDs in the disc
magazine in random order.
1 Press RNDM during CD Changer play.
“RANDOM” appears in the display.
To cancel Random Play, press RNDM again.
Note
Pressing r during Random Play locates the beginning
of the current track. The unit does not retrieve previous
tracks during Random Play.
CD Changer indicator Track number
CD number
1 Press FNC repeatedly to display “CD-CH.”
The CD Changer play starts.
7
ENGLISH
To
Skip to the next track
Skip back to the beginning of
the current track or to the
previous track
Advance rapidly to locate a
desired point
Reverse rapidly to locate a
desired point
Start CD Changer play from
the first track on the next disc
Start CD Changer play from
the first track on the previous
disc
001/CDC-X517M/X417/X317(YU)E 00.12.25, 2:45 PM 8